Base Illustration; Base Features; Basic Base Station Features - EnGenius EP801 Manual De Usuario

Base Illustration

~17~

Base Features

Basic Base Station Features

1. Antenna
a. The antenna port has a normal thread connector; to remove
antenna or cable, turn counterclockwise; to install, turn clockwise.
Improper installation may damage the connector.
b. When using an outdoor antenna, locate the antenna (not the base
station itself) as high as possible for a clear transmission path.
2. LED
a. Power: it indicates base station has power.
b. In-Use: it indicates an active telephone line.
c. Broadcast: it indicates "Broadcast" taking place.
3. RESET Button
a. Restores base station to factory settings
b. Reset button is indented to prevent accidental system reset.
c. All handsets (including administrator) and additional base(s) need to
be re-registered after a base station reset.
4. Registration Button (REG)
Enters registration mode along with handset, assigns handset ID (11-19).
5. Line Jack
Standard RJ-11C/CA-11A connector to plug in the telephone line
6. Telephone Jack
Another RJ-11C to plug in the optional answering machine
7. Dialing Keys
a. Enter the phone no after pressing the Speakerphone key.
b. Enter the handset ID or Group ID when making the intercom call or
broadcast.
c. Enter the phone no when storing the base speed dial directory.
8. Function Keys
a. TRANSFER (
): during talk, press the key to transfer the call to a
registered handset.
b. MEMORY (
): store phone number into speed dial memory of
base unit. Up to 20 entries. Or retrieve a phone number from the
~18~