Receiving An Intercom Call; Ending A Call; Adjusting Handset Receiver (Earpiece) Voice Volume; Adjusting Handset Speakerphone Voice Volume - EnGenius EP801 Manual De Usuario

the SILENT key operation is valid only for the current call.
2. If Caller ID service is available, the LCD will display the
incoming call information. If the LCD shows "Private" or
"Unknown", the caller's information may have been blocked by
the caller or the originating phone company.
B. Base
1. When an incoming call arrives, the ringer will ring, the speaker LED will
flash.
2. Press the
to answer the call.

Receiving an Intercom Call

A. Intercom Call from Handset
1. When an intercom call arrives (called from other
handsets, ex. Handset 12), the ringer will ring or
vibrate unless the ringer has been turned off. Press
to answer the intercom call.
2. If the handset is on the charger cradle (ringer will be
temporarily switched to "Ring" if it has been set to
"Vibrate"), lift the handset and start conversation.
3. If the handset is not on the cradle, press any key (except
SILENT soft key) to answer.
Notes:
1. The LCD displays the caller's Handset ID.
2. You can press the SILENT
the call. Unlike turning off the ringer the
valid only for the current call.
B. Intercom Call from Base
1. When an intercom call arrives (called from Base), the
ringer will ring or vibrate unless the ringer has been
turned off. Press to answer the intercom call.
2. If the handset is on the charger cradle (ringer will be
temporarily switched to "Ring" if it has been set to
"Vibrate"), lift the handset and start conversation.
and the
(Left) soft key if you choose to ignore
SILENT key operation is
~31~

Ending a Call

A. from Handset
To end a telephone or intercom call, press
charger cradle.
B. from Base
To end a telephone call, press
key.

Adjusting Handset Receiver (Earpiece) Voice Volume

1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Default = 3.
Use or key to adjust
3. The new setting remains effective for all future calls
until changed.

Adjusting Handset Speakerphone Voice Volume

1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Default = 3.
Use or key to adjust
3. The new setting remains effective for all future calls
until changed.

Adjusting Base Speakerphone Voice Volume

1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Default = 3. Use
key to adjust
3. The new setting remains effective for all future calls until changed.
key, or place handset into
key. To end a intercom call, press
or
~32~