Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
Impacting Sound Level dB(A)
Models
† Pressure (L
2145QiMAX
2145QiMAX-AP
2145QiMAX-3
2145QiMAX-3-AP
2145QiMAX-6
2145QiMAX-6-AP
2155QiMAX
2155QiMAX-AP
2145QiMAX-SP
2145QiMAX-SP-AP
2155QiMAX-SP
2155QiMAX-SP-AP
† K
= 3dB measurement Uncertainty
pA
‡ K
= 3dB measurement Uncertainty
wA
* K = Vibration measurement Uncertainty
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o , to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 47132782 and table on page 2. Maintenance frequency is shown in a circular
arrow and de ned as h=hours, d=days, and m=months of actual use. Items identi ed as:
1. Air lter
2. Regulator
3. Lubricator
4. Emergency shut-o valve
5. Hose diameter
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand O ce or Distributor.
EN-2
(ISO15744)
) ‡ Power (L
p
w
96.3
107.3
96.3
107.3
96.3
107.3
96.3
107.3
96.3
107.3
96.3
107.3
Free Speed Sound Level
dB(A)
(ISO15744)
) † Pressure (L
) ‡ Power (L
p
91.1
102.1
91.1
102.1
91.1
102.1
91.1
102.1
91.1
102.1
91.1
102.1
7.
Coupling
8.
Safety Air Fuse
9.
Oil
10. Grease - during assembly
11. Grease - through tting
Vibration (m/s )
(ISO28927)
) Level
*K
w
8.7
2.7
8.7
2.7
8.7
2.7
8.7
2.7
8.7
2.7
8.7
2.7
47103767_ed2
Tabla de contenido
