State Of Charge Display; Items Supplied; Impact Wrench - Hilti SID 4-A22 Manual Del Usuario

3.3 State of charge display

The charge state of the Li­ion battery is displayed after pressing one of the
two battery release buttons lightly (press only until slight resistance is felt).
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
Note
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.

3.4 Items supplied

Impact screwdriver, operating instructions.
Note
You can find other system products approved for use with your product
at your local Hilti Center or online at: www.hilti.com.
4 Technical data

4.1 Impact wrench

Rated voltage
Weight in accordance with EPTA proce-
dure 01/2003
Rated speed under
no load
Impact speed
Torque adjustment
Large standard bolts
Large high-strength bolts
Socket/bit drive
4.2 Noise information and vibration values determined in accordance
with EN 60745
The sound pressure and vibration values given in these instructions have
been measured in accordance with a standardized test and may be used to
20 English
Printed: 27.09.2016 | Doc-Nr: PUB / 5293888 / 000 / 01
All manuals and user guides at all-guides.com
Meaning
• Charge state: 75 % to 100 %
• Charge state: 50 % to 75 %
• Charge state: 25 % to 50 %
• Charge state: 10 % to 25 %
• Charge state: < 10 %
Torque setting I
Torque setting II
Torque setting III
21.6 V
1.5 kg
0 /min ... 1,000 /min
0 /min ... 1,500 /min
0 /min ... 2,700 /min
≤ 3,500 bpm
3 settings
M8 to M16
M6 to M12
/ " hex. socket with locking
1
4
ring