Led Indicator - Mitsubishi Electric PAR-U02MEDA Manual De Instrucciones

▌ LED Indicator

LED Indicator
Operation status
The unit is in operation.
The unit is stopped.
An error is occurring.
Energy-save control is being
performed.
The occupancy sensor has
sensed an occupant.
A button is touched on the Home
screen.
*1 The settings can be made on the LED Indicator setting screen.
Default color setting
Color
Blue
Light blue
Yellow
White
Red
Green
Lime
* Purple, pink, and orange are not used by default.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
• The LED indicator indicates the operation status by lighting and
blinking with different colors and brightness (High/Low), or by turning
off.
• Indicator colors: Blue, Light blue, Purple, Red, Pink, Orange, Yellow,
Green, Lime, and White
Lights up in different colors according to the operation mode or the room temperature
(three different levels). *1
Turns off.
Blinks in the color it is illuminated in at the time.
Lights up in the predetermined color. *1
Inverts the brightness (High/Low) twice. *1
Inverts the brightness (High/Low). *1
Operation mode setting (default)
Cool (Auto_Cool)
Dry
Fan
Auto
Heat (Auto_Heat)
Night setback
Energy-save control is in effect that has been performed when the occupancy sensor
detected vacancy.
LED indicator
Room temperature
0ºC–21ºC (32ºF–69ºF)
Not used
21.5ºC–26ºC (70ºF–79ºF)
Not used
26.5ºC–40ºC (80ºF–104ºF)
Not used
Product features
19