Function Check; Intervals; Procedure; Servicing - Weinmann NP15 Instrucciones De Uso

6 Function check

6.1 Intervals

Perform a function check after every hy-
giene treatment.

6.2 Procedure

If the forehead cushion becomes
discolored, this does not affect its
function.
1. Check all parts for soiling and damage.
Replace parts if necessary.
2. In the event of leaks due to damage,
replace the nasal pillow.

7 Servicing

The mask requires no servicing.

7.1 Storage

The mask may only be stored under the
ambient conditions described (see "Tech-
nical data" on Page 17)

7.2 Disposal

Parts which are no longer usable can be
disposed of with domestic waste.

8 Troubleshooting

Fault Cause
Pain in the
face or on
Mask too
the nose
tight
from
pressure
16
EN
Remedy
Adjust headgear and
modify position of
forehead support
Fault Cause
Mask not
correctly
adjusted
Air
escaping
between
nasal pillow
and nose
Therapy
pressure Nasal pillow
not damaged
reached
Tube sys-
tem leaking
Air
escaping at
pressure
measu-
rement port

9 Scope of supply

Note
All masks are supplied fully assembled (ex-
cept for nasal pillow) and with headgear.
Article
Nasal pillow mask, size S/M/L
Headgear
Carrying bag
Instructions for use NP15 DE,
EN, FR, NL, IT, SV, RU, TR, ZH, ES

10 Replacement parts

Article
Nasal pillow, size S
Nasal pillow, size M
Nasal pillow, size L
Remedy
Adjust headgear and
modify position of
forehead support
Position nasal pillow
correctly or use nasal
pillow of a different
size
Replace nasal pillow
Check connector
and firm location of
tube sleeves
Seal pressure measu-
rement port with
plug
Article no.
WM 26755
WM 26775
WM 14619
WM 67115
Article no.
WM 26782
WM 26787
WM 26792