Operation; Insert/Remove The Grass Catcher; Insert/Remove Mulching Kit; Insert/Remove Side Ejection Channel - Grizzly Tools ERM 1846 GT Traducción Del Manual De Instrucciones Original

GB
Insert/Remove the grass
catcher
Prior to using the catcher make
sure that
- the mulching kit (
been removed (see "Insert/Re-
move mulching kit"),
- the side ejection channel (
has been removed (see "Insert/
Remove side ejection channel").
If necessary, also remove the pro-
tection caps on the grass catcher.
Insert the grass catcher
1. Lift the collision guard (5).
2. Place the grass catcher (7) on the
mounting bracket (24) provided at the
back of the lawn mower.
3. Lower the collision guard (5) onto the
grass catcher (7) - it will keep it in
place.
Remove the grass catcher
4. Lift the collision guard (5).
5. Unhook the grass catcher from the
mounting bracket. Flap down the colli-
sion guard to the housing.
On emptying the grass catcher
also refer to section "Disposal/en-
vironment".
Insert/Remove mulching
kit
Prior to using the mulching kit
make sure that
- the side ejection channel (
has been removed. (see "Insert/
Remove side ejection channel"),
- the grass catcher (
been removed (see "Inser/Re-
move grass catcher").
74
1. Lift the collision guard (5).
2. Insert the red locking button (22)
21) has
3. Lift the collision guard (5).
23) 4. Insert the red locking button (22)
1. Lift the lateral impact protection (11).
2. Mount the side ejection channel (23)
3. Lift the lateral impact protection (11).
4. Remove the side ejection channel (23)
23)
7) has
Hold the cutting height adjuster (12) and
move it to the correct cutting height, as
appropriate.
Insert mulching kit:
downwards and insert the mulching kit
(21). The red locking button clicks into
place.
Remove mulching kit:
downwards and remove the mulching
kit (21).
Insert/Remove side ejec-
tion channel
Prior to using the side ejection
channel make sure that
- the mulching kit (
been removed (see "Insert/Re-
move mulching kit"),
- the grass catcher (
been removed (see "Insert/Re-
move grass catcher").
Insert side ejection channel
and remove the lateral impact protec-
tion (11). It holds the side ejection
channel in position.
Remove side ejection channel
and fold back the impact protection
(11) on the device housing.
Adjusting the Cut Height
Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
21) has
7) has