Assembling Instructions; Operation; Turning On And Off - Grizzly Tools 2020-25 Li Traducción Del Manual De Instrucciones Original

To reduce the risk of serious
or lethal injuries, we rec-
ommend that persons with
medical implants consult
their doctor and the manu-
facturer of their medical
implant before operating the
machine.

Assembling instructions

Remove the rechargeable bat-
tery from the device before as-
sembly. Insert the rechargeable
battery only once the device is
completely assembled. There is
a risk of injury!
Mounting the protective cover:
1. Place the protective cover (12)
onto the motor head (10) and
fasten it using the 4 Phillips
screws (19).
2. Place the distance roller (16)
onto the protective cover (12)
and fasten it using the 2 Phillips
screws (19).
Installing the cutting unit:
3. Insert the cutting disk (14) into the
cap (13). The side of the cutting
disk (14), on which the rotation
direction is indicated by arrows,
must be visible after insertion.
Replacement plastic blades can be
found in the storage box (
the additional handle (
To put on the auxiliary handle:
4. Unscrew and remove the pre-
assembled quick-release lever
(25) of the additional handle (5).

Operation

5a) on
5).
5. Pull the ends of the auxiliary
handle (5) to extend the handle
and slide it over the handle
holder (24). The holder for the
spare spool (4) points upwards.
6. Screw the additional handle (5)
to the quick-release lever (25).
7. Lock the quick-release levers
(25) by pressing them in the di-
rection of the bar (1).
They must fit the additional
handle (5) so that a tensioning
with medium force can be car-
ried out.
Otherwise, the quick-release
levers (25) must be turned
clockwise for tensioning them or
anti-clockwise to loosen them.
Caution: risk of injury! Do not
operate the appliance without
the protective cover. To oper-
ate the appliance, wear suitable
clothing, eye and ear protection.
Prior to every use, check that
the appliance is operative. Do
not block the On/Off switch or
the switch lock. They must reli-
ably turn off the motor when you
release the switch. Do not oper-
ate the appliance if one of the
switches is damaged.
Please observe local regulations
concerning noise protection.

Turning on and off

Maintain a firm stand and hold the
appliance well with both hands and
at some distance away from your
body. Before turning on the appli-
GB
51