Measurement Using Tricheck - A&D Medical LIFE SOURCE UA-1030T Manual De Instrucciones

1. Press the
START
All of the display segments are displayed.
Zero (0) is displayed blinking briefly and the
first measurement starts.
2. When the measurement is complete, the
systolic and diastolic pressure readings
and pulse rate are displayed, then a
one-minute countdown starts for the second
measurement.
3. After one minute, the second measurement
starts.
4. When the measurement is complete, the
average readings of the first and second
measurements are displayed, then a
one-minute countdown starts for the third
measurement.
5. After one minute, the third measurement
starts.
6. When the measurement is complete, the
average readings of the three measurements
are displayed and stored in memory.
Notes:
During the measurement, the TriCheck
symbol is displayed.
To cancel the measurement, press the START
button. In this case, no data is stored in
memory.
When the cuff fit error symbol appears during the first measurement, cancel
the measurement, reapply the cuff correctly and start a new measurement.
After measurement, the average data of the three measurements is stored in
memory. No data will be stored, when canceling the measurements, or before
completion of the third measurement.
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991
button.

MEASUREMENT USING TRICHECK

START
One minute after
One minute after
At heart level
Press
All of the display
segments displayed
First measurement
Results of the
first measurement
Second measurement
Average of the first and
second measurements
Third measurement
Average of the
three measurements
E-16