Schumacher Electric XI14 Manual Del Usuario página 4

manual. Otherwise, contact the manufacturer to find out whether
the device you want to use is compatible with a modified sine wave.
To calculate the wattage: Wattage = AMPS x 120 (AC Voltage).
To calculate the starting load: Starting Load = 2 x WATTS. In
general, the start up load of the device or power tool determines
whether your inverter has the capability to power it.
To calculate the continuous load: Continuous Load = AMPS x 120
(AC Voltage).
Always run a test to establish whether the inverter will
operate a particular piece of equipment or device. In the event of a
power overload, the inverter is designed to automatically shut down.
This safety feature prevents damaging the inverter while testing
devices and equipment within the wattage range of the inverter.
This inverter is designed to power 100 watt devices
or less when used with the vehicle 12 volt accessory port. To use
the full output you must purchase a 12 volt accessory outlet to
battery clips adapter (Schumacher Model SAC-103) and connect
the inverter directly to the battery.
NOTE: The 100 watt limit is to accommodate the fuse ratings for
all vehicles. Some vehicles may allow the full output. If the fuse
blows when you switch on the device you are trying to use, you
have to either use a smaller device or you must purchase the 12
volt accessory outlet to battery clips adapter (Schumacher Model
SAC-103) and connect the inverter directly to the battery.
This inverter uses a nonsinusoidal waveform. Therefore
we do not recommend you use it to power the following devices:
1. Switch Mode Power Supplies
2.
Linear Power Supplies
3. Class 2 Transformers
4. Line Filter Capacitors
5. Shaded Pole Motors
6. Fan Motors
7. Microwave Ovens
8. Fluorescent and High Intensity Lamps (with a Ballast)
9. Transformerless Battery Chargers.
Doing so may cause the device to run warmer or overheat.
• 3 •