Tensioning The Saw Chain (Quick Chain Tensioner); Checking Chain Tension; Fuel - Stihl MS 210 Manual De Instrucciones

Ocultar thumbs Ver también para MS 210:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Tensioning the Saw Chain
(quick chain tensioner)
1
2
Retensioning during cutting work:
N
Shut off the engine.
N
Pull out the hinged clip and loosen
the wingnut.
N
Turn the adjusting wheel (1)
clockwise as far as stop.
N
Tighten down the wingnut (2) firmly
by hand.
N
Fold down the hinged clip.
N
Go to "Tensioning the Saw Chain"
A new chain has to be retensioned more
often than one that has been in use for
some time.
N
Check chain tension frequently –
see chapter on "Operating
Instructions".
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C

Checking Chain Tension

N
Shut off the engine.
N
Wear work gloves to protect your
hands.
N
The chain must fit snugly against
the underside of the bar and it must
still be possible to pull the chain
along the bar by hand.
N
If necessary, retension the chain.
A new chain has to be retensioned more
often than one that has been in use for
some time.
N
Check chain tension frequently –
see chapter on "Operating
Instructions".

Fuel

This engine is certified to operate on
unleaded gasoline and the STIHL two-
stroke engine oil at a mix ratio of 50:1.
Your engine requires a mixture of high-
quality gasoline and quality two-stroke
air cooled engine oil.
Use mid-grade unleaded gasoline with a
minimum octane rating of 89 (R+M/2). If
the octane rating of the mid-grade
gasoline in your area is lower, use
premium unleaded fuel.
Fuel with a lower octane rating may
increase engine temperatures. This, in
turn, increases the risk of piston seizure
and damage to the engine.
The chemical composition of the fuel is
also important. Some fuel additives not
only detrimentally affect elastomers
(carburetor diaphragms, oil seals, fuel
lines, etc.), but magnesium castings and
catalytic converters as well. This could
cause running problems or even
damage the engine. For this reason
STIHL recommends that you use only
high-quality unleaded gasoline!
Gasoline with an ethanol content of
more than 10% can cause running
problems and major damage in engines
with a manually adjustable carburetor
and should not be used in such engines.
Engines equipped with M-Tronic can be
run on gasoline with an ethanol content
of up to 25% (E25).
Use only STIHL two-stroke engine oil or
equivalent high-quality two-stroke
engine oils that are designed for use
only in air cooled two-cycle engines.
English
29

Hide quick links:

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Ms 230Ms 250

Tabla de contenido