Stihl MS 210 Manual De Instrucciones página 62

English
Cutting Attachment (MS 210,
MS 210 C, MS 230, MS 230 C)
Recommended cutting attachments
complying with Section 5.11 of ANSI B
175.1-2000.
Observe notes on ANSI B 175.1-2000
and definition of "low kickback chain" in
chapter on "Safety Precautions and
Working Techniques".
Rollomatic E 3/8" P Guide Bars
Reduced kickback STIHL guide bar
(with green label)
Cutting lengths: 12, 14, 16 in. (30, 35,
40 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.050 in. (1.3 mm)
Nose sprocket: 9-teeth
3/8" P Chain
Low kickback STIHL saw chains (with
green label)
Picco Micro Comfort 3 (63 PMC3)
Picco Duro (63 PD3)
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 0.050 in. (1.3 mm)
Chain sprocket
6--tooth for 3/8" (spur sprocket)
Cutting Attachment (MS 250,
MS 250 C)
Recommended cutting attachments
complying with Section 5.11 of ANSI B
175.1-2000.
60
Observe notes on ANSI B 175.1-2000
and definition of "low kickback chain" in
chapter on "Safety Precautions and
Working Techniques".
Rollomatic E 3/8" P guide bars
Reduced kickback STIHL guide bar
(with green label)
Cutting lengths: 12, 14, 16, 18 in. (30,
35, 40, 45 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.050 in. (1.3 mm)
Nose sprocket: 9-tooth
Rollomatic E .325" guide bars
Reduced kickback STIHL guide bar
(with green label)
Cutting lengths: 16, 18 in. (40, 45 cm)
Pitch: .325" (8.25 mm)
Groove width: 0.063 in. (1.6 mm)
Nose sprocket: 11-tooth
3/8" P Chain
Low kickback STIHL saw chains (with
green label)
Picco Micro Comfort 3 (63 PMC3)
Picco Duro (63 PD3)
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 0.050 in. (1.3 mm)
.325" saw chain
Low kickback STIHL saw chains (with
green label)
Rapid Micro Comfort 3 (26 RMC3)
Pitch: .325" (8.25 mm)
Drive link gauge: 0.063 in. (1.6 mm)
MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
Chain sprockets
6-tooth for 3/8" (spur sprocket)
7-tooth for 0.325" (spur sprocket)
Cutting Attachment (MS 210,
MS 210 C, MS 230, MS 230 C, MS 250,
MS 250 C)
To ensure compliance with the kickback
properties required in Section 5.11 of
ANSI B 175.1-2000, only use
replacement chains that, when used
with this specific powerhead, comply
with Section 5.11 of the ANSI standard
or are classed as "low kickback" chains
according to ANSI B 175.1-2000.
Please ask your STIHL dealer for the
latest recommendations on new
bar/chain combinations developed after
publication of this instruction manual.