Technoline WS 9065 Manual Del Usuario página 23

Press "CH" button
Press "CH" Press "CH" Press "CH"
Automatic
Automatic
Maximum/minimum values
Press the "MEM" button once, the LCD will display
maximum value of temperature/ humidity. The LCD will
display the minimum value of temperature/humidity if press
once "MEM" button again after the maximum value is
displayed.
 At the same time, there are "MAX" or "MIN" displayed on
the LCD.
 The temperature/humidity maximum/minimum value can
be reset by pressing and holding the "MEM" button for 3
seconds.
Please note:
 If the temperature reading is below the measuring ranges,
LL.L will be displayed. If the temperature reading is above
the measuring ranges, HH.H will be displayed.
Ice alert
 The ice alert symbol
appears and flashing when the
outdoor temperature at –1℃ to + 2.9 ℃ or +30.2℉ to +
37.2℉.