Idiomas disponibles
Idiomas disponibles
insert 2 x AA batteries observing polarity [ "+" and "–"
marks]
After receiver has received the outdoor remote sensor, it
will enter the radio controlled time reception mode.
Reception of the Radio signal:
The clock will automatically search the DCF signal after 3
minutes of any restart or changing of new fresh batteries.
The radio mast icon starts to flash.
At 1:00 /2:00 / 3:00 AM, the clock automatically carries out
the synchronization procedure with the DCF signal to
correct any deviations to the exact time. If this
synchronization attempt is unsuccessful (the radio mast
icon disappears from the display), the clock will
automatically attempt another synchronization at the next
full hour. This procedure is repeated automatically up to
total 5 times.
To start manual DCF signal reception, press and hold the
"Wave" button for two seconds. If no signals received within
7 minutes, then the DCF signal search stops (the radio mast
icon disappears) and start again at the next full one hour.
During DCF reception, to stop searching radio signal,
press the "Wave" button once.
Please note:
A flashing radio mast icon indicates that the DCF signal
reception has started
A continuously displayed radio mast icon indicates that the
DCF signal was received successfully
We recommend a minimum distance of 2.5 meters
(8.2Feet) to all sources of interference, such as televisions
or computer monitors or switching power adapter.
When receiving the DCF radio wave, it will automatically
turn off the USB charging and backlight.
