Idiomas disponibles
Idiomas disponibles
Please note:
If there is no valid operation within 20 seconds, the clock
automatically returns to the normal time mode.
Alarm setting
Push the "AL" switch to the "on" position, the LCD displays
the "
" icon. At the same time issued BI-BI sound (Except
for RC), the alarm function is ON. Push the "AL" switch to
the "off" position, the "
display, the alarm function is OFF.
Press the "mode" button once and the LCD displays alarm
time. Press and hold the "mode" button for 2 seconds until
hour of the alarm time starts to flash. Press the "+" and "-"
buttons to set the hour.
Press the "mode" button to confirm your setting, The
Minute of the Alarm time starts to flash. Press the "+" and
"-" buttons to set the minute.
Press the "mode" button to confirm your setting, the
snooze time starts to flash. Press the "+" and "-" buttons to
set the snooze duration from 1-60 minutes.
Press the "mode" button to confirm your setting and to
end the setting procedure.
Please note:
If there is no valid operation within 20 seconds, the clock
automatically returns to the normal time mode.
The alarm will sound for 2 minutes if you do not deactivate
it by pressing any button. In this case the alarm will be
repeated automatically after 24 hours.
Rising alarm sound (crescendo, duration: 2 minutes)
changes the volume 4 times whilst the alarm signal is
heard.
" icon will disappears from the
