Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Never attempt to open for any reason.
Do not store in locations where the temperature may exceed 40 °C.
When disposing of batteries, follow the instructions given in the section "Protecting the
environment".
Do not incinerate the batteries.
Warning! To reduce the risk of injury, the user must read the instruction manual.
Additional safety instructions for wire detectors
Do not use the tool to detect AC voltage in uninsulated, exposed or free wires.
Do not use the tool as a substitute for a voltmeter.
Be aware that the tool may not always properly detect all wires. The following conditions
can cause inaccurate results:
- Low battery
- Thick walls with thin wires
- Very thick walls
- Very deep wires
- Walls covered with metal
- Very humid conditions
- Shielded cables
Before use, always test the tool by detecting a known wire.
If in doubt contact a qualified contractor.
Warning! This tool will not detect wires in circuits isolated from the mains supply, cables
operating at direct current (DC) or wires used for telecommunication or computer systems.
Hidden wires (e.g. wall lights) may not be detected when switches are in the off position.
Features
1. Screwdriver forward switch
2. Screwdriver reverse switch
3. AC wire detection button
4. AC wire detection LED indicator
5. Screwdriver spindle
6. Screwdriver bit storage
7. LED pods slide switch
8. Pliers
9. Pliers handle release switch
10. Sheath splitter
11. Wire cutter
ENGLISH
9
Tabla de contenido
