Protecting The Environment - Black and Decker BDET700 Manual De Instrucciones

ENGLISH
Using the bit storage
The tool is fitted with bit storage slots (6) to store unused bits.
Using the protective cap
The protective cap (13) is attached to the tool and can be fitted to either end.
Fit the cap over the pliers when using the tool as screwdriver.

Remove any screwdriver bits and fit the cap over the screwdriver end when using the

tool as pliers.
Hints for optimum use
Always use the correct type and size of screwdriver bit.

Use the spindle lock to loosen very tight screws or to firmly tighten screws.

Always hold the tool and screwdriver bit in a straight line with the screw.

Storage
If the tool is not used proceed as follows:
Place the protective cap (13) on the pliers (8).

Remove the battery if the tool is not used for a long period of time.

Maintenance
Your tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
Regularly clean the motor housing using a damp cloth. Do not use any abrasive or

solvent-based cleaner.

Protecting the environment

Z
Separate collection. This product must not be disposed of with normal household
waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no
further use to you, do not dispose of it with household waste. Make this product available for
separate collection.
12