Connection To The Electric Network - Saeco Dually Manual De Instrucciones

Before connecting
appliance to the water
mains, please read and
follow the
regulations in force in your
country.
Remove the cap from the coupling on the lower panel of
the appliance. Connect the water network hose to the
appliance's 3/4" threaded coupling.
the
applicable
5.4
The water network hose
must be certified according
to the IEC 61770 standard.
If the appliance comes with
a supply hose for the water
network, only use the
supplied part.
reuse old hoses.
Keep the cap in a dry place
and use it when storing the
appliance.
Connection to the Electric
Network
This operation must only be
performed by specialised
technical personnel or by
the service provider.
The appliance is suitable
for electrical
with a single-phase voltage
of 230-240
appliance
connected to a power
supply with a maximum
impedance (Z) of 0,298
ohms.
English
Do not
operation
V~. The
must be
87