TrekStor DataStation pocket q.ue Manual De Instrucciones página 10

1) Startup
Connecting the DataStation to the computer via USB
Use the provided USB Y-connection cable to connect the DataStation to your computer. Connect both
USB A-plugs to the USB ports of your computer and then the mini-USB A-plug to the DataStation. Your
operating system will automatically recognize the DataStation, and add the DataStation as a "l
(or "l ") to "m
oCAl Drive y Computer
In order to ensure a convenient supply of power to the ultra-mobile DataStation pocket without having
i
to carry an external power supply unit, all DataStation pocket are delivered with a lightweigt and
space-saving USB Y-connection cable. Please always insert both USB A-plugs and make sure that your
computer or notebook offers sufficient power (500 mA) at both USB ports. Insufficient power, which may
occur when only one plug is inserted or when a passive USB hub is used, can in rare cases cause data loss
or even mechanical failure of the hard disk. TrekStor assumes no liability or warranty for damage to the
DataStation arising from insufficient power.
If only one free USB port is available in your computer
i
or notebook, please proceed as follows:
1) Connect the USB plug (1) to the power supply with a USB
charger (such as a TrekStor USB charger e.f. which can be
purchased separately) or an active USB hub.
2) Next, insert the USB plug (2) for data transmission into
your computer or notebook.
3) Plug the mini-USB plug (3) into the DataStation.
En
10
"/"C " (Microsoft® Windows) or the "D
omputer
oCAl Disk
" (Mac® OS X and Linux®).
esktop
"