External Unit; Data Table - Stiebel Eltron WK 1 Instrucciones

INSTALLATION
Specification
4.2 Securing the assembly to the wall
f Ensure that the closed end of the rail supports points f
upwards.
f Drill the holes. f
f Insert rawl plugs into the holes. f
f Position the retaining clips onto the system rails. f
f Insert the screws through the retaining clips and the sys- f
tem rails. Secure the system rails to the wall.
Material losses
!
Ensure that the wall mounting support is flush with
the wall.
f Check that the rail supports are horizontally and vertically
f
level, using a spirit level.
f If required, level the rail supports by undoing and tigh- f
tening the screws.
f Tighten all screws. f
WK 1

4.3 External unit

1
1 Anti-vibration mount
f Undo the appliance feet from the external unit. Dispose of
f
the appliance feet.
f Screw the anti-vibration mounts into the external unit in f
the positions shown.
f Place the external unit with fitted anti-vibration mounts f
onto the mounting brackets.
f Secure the threaded pins from below with washers and
f
nuts.
Material losses
!
Have a trained contractor check the installation to en-
sure that the appliance is permanently and securely
installed.
5. Specification
5.1

Data table

Support length mm
Weight kg
Weighting kg
Suitable for 10 AC(S), 15/25 I(S)-2, 15/25 IK(S)-2, classic
WK 1
232963
740
10
120
| 7