Hydrofarm Phatom II PHB2010 Manual De Instrucciones página 4

INSTRUCTIONS
PHANTOM II BALLAST DIMMING
• Press the dimming button to cycle through the dimming levels (Figure 5).
The appropriate LED indicator will light up to indicate selected dimming level
(60%, 75%, 100%, Super).
• The Phantom line of ballasts has built-in hot-restrike programming
to protect the lamp and ballast in the event of the ballast turning off
unexpectedly. The ballast will not attempt to restart a hot lamp for at least
15 minutes. If your lamp fails to start immediately, DO NOT cycle the power
on and off. This can damage the lamp and ballast. If after 30 minutes your
lamp is still not lit, shut off power to the ballast, and reconnect. This will
begin the startup sequence again.
www.Hydrofarm.com
4
Figure 5