Fluke Networks AitCheck Guia Del Usuario página 21

Discover Channels, Networks, APs, or Clients
O
Press
that come into range are added to the top of the
list. Networks that become out of range become
gray if Gray inaudible access points is enabled.

ACL: The authorization status of the access point.
The default status is
Change the status of each access point to show how
it is related to your network. To change the status,
select Access Points from the home screen, select an
access point, then press
(...): All access points in the network do not have the
same authorization status.

: The maximum signal strength of all the
access points for a network SSID.
Signal to noise level is a measure of signal

SNR:
strength relative to noise. The ratio is
measured in decibels (dB).

: The security status of the network:
Red open lock: The network does not have
security enabled.
Some networks with an open lock will allow
you to connect the tester and perform
measurements including running the Ping test,
but a PC connecting to the same network
might not be able to connect to the web
without a user ID and password.
Yellow closed lock: One or more access points
use WEP or Cisco LEAP security protocol. These are
less secure than other protocols.
, then move through an area. Networks
Unauthorized device.

ACL.
Note
15