Settings; Setting Pabx Code; Setting Alarm Clock - Steren TEL-225 Manual De Instrucciones

6. SETTINGS

6.1 Setting PABX code

When using behind a PABX that requires dialing a separate number to connect to
external lines. This PABX code when set will automatically insert to the front part of the
normal telephone number when you make a call.
1. With the phone on the hook, press and hold DEL key for 3 seconds to set PABX code,
LCD displays
SET PCODE - and the "-" flashes.
2. Press UP or DOWN key to set PABX code from 0 to 9 or -.
3. If choose "-", it means no PABX code has been set.
4. Press SET key to confirm and exit.

6.2 Setting Alarm Clock

1. In on-hook state, press ALARM/P key once, LCD displays
12-00 AL1.
2. Press UP or DOWN key to select ON or OFF. LCD
displays "ALM" icon when the alarm is set to ON.
3. Press SET key, value "12" starts to flash.
4. Press UP or DOWN key to set the alarm hour and press SET key to confirm and enter
alarm minute setting.
5. Press UP or DOWN key to edit alarm minute and press SET key to confirm and go to next
group alarm clock setting.
6. Repeat the above steps to set additional alarms.
The first 3 groups alarm clock setting will be repeated periodically every day while the last
2 groups alarm clock settings are activated only once
15 15