Controlling Another Cd Player (Advanced Mega Control) - Sony CDP-CX260 Manual De Instrucciones

Playing CDs
Controlling Another CD Player
(Advanced Mega Control)
This unit can control a second CD player (see
"Connecting Another CD Player" on page 9).
Even when a second CD player is connected, the
controls on both of the units will function. When you
press the play button on either unit, the operating
player stops and the idle player starts.
Make sure "2nd DETECTED" appears in this player's
display after turning on both players.
Note that, depending on the player, you may not be
able to operate all the functions of the second CD
player.
The controls indicated in the illustration below are effective
while the MEGA CONTROL button is lit.
Play mode buttons
(CONTINUE/SHUFFLE/
PROGRAM/REPEAT)
PLAYER
SELECT
·
=/+
0/)
EN
26
MEGA
INPUT
CONTROL
≠/± · P
PLAYER SELECT
MENU
RACK BACK
PUSH EN ER
P
p
CON INUE SHUFFLE
PROGRAM REPEA
MEMO SCAN DISC
SKIP
IME/ EX
1
Press MEGA CONTROL on this player.
The MEGA CONTROL button and "2nd" in the
display light up. The display shows the current
disc number or Disc Memo of the second player.
ALL DISCS
2nd
* D I S C - 4 *
Current disc number or the Disc Memo
2
Select the desired play mode.
To program tracks, use the controls on the second
player.
You cannot change the second CD player's ALL
DISCS Play mode to 1 DISC Play mode, or vice
versa, by using the play mode button on this
player.
3 Press · on this player to start playing.
The play starts and the display shows the current
JOG
disc, track numbers, and the playing time of the
track.
While the MEGA CONTROL button is lit, you can
control the second player with the controls on this
player.
To control the master player again
Press MEGA CONTROL. The MEGA CONTROL button goes
off and you can control the master player.
To control the master player again by using the remote, you
p
have to reselect the master player by pressing
PLAYER SELECT on the remote.
To control the second player directly using the supplied
remote Z
While the MEGA CONTROL button is off, press PLAYER
SELECT repeatedly until "2nd player" appears in the remote's
display.
4
CD1
DISC
2nd PLAYER CD3
CD 3 / 2 0 0 d i s c s
2 n d p l a y e r