Idiomas disponibles
Idiomas disponibles
6
20. Obtain the kit supplied surround trim ring (3) and begin
installing by inserting the locator tab (1) into the top
center slot of the grille's front (2).
NOTE: Surround trim ring only has one locator tab and
is located at the top of the part.
21. Finish installing by aligning the mounting tabs into
their prospective slots and pushing firmly on the
outside of the trim ring to seat. Start in one corner
and work in a clockwise motion. A loud click/snap
sound is normal when installing.
NOTE: To aid in installation, lay the fascia on it's back
with it's front facing up. Support the grille with a block
of wood between the back of the grille and the floor/
tabletop/bench in the area you are installing.
22. Look on the rear and inspect that all mounting tabs are
seated properly.
23. With the aid of an assistant, support and position the
fascia (1) to the vehicle.
Jun 10, 2010
K6860991
