Cochlear Baha 5 Manual Del Usuario página 4

Contacting Customer Service
We strive to provide you with the best possible
products and services. Your views and experiences
with our products and services are important to
us. If you have any comments you would like to
share, please contact us.
Customer Service – Cochlear Americas
10350 Park Meadows Drive, Lone Tree
CO 80124, USA
Toll free (North America) 1800 523 5798
Tel: +1 303 790 9010, Fax: +1 303 792 9025
E-mail: [email protected]
Key to symbols
The following symbols will be used throughout this document.
Please refer to the list below for explanations:
"Caution" or "Caution, consult
accompanying documents"
Audible signal
CE mark and Notified Body
number
2797
Manufacturer
Batch Code
Catalogue number
Made for iPod, iPhone, iPad
Refer to instructions/booklet.
Note: Symbol is blue.
Recyclable material
Radio compliance certification
for Japan
4
Customer Service – Cochlear Europe
6 Dashwood Lang Road, Bourne Business Park,
Addlestone, Surrey KT15 2HJ, United Kingdom
Tel: +44 1932 26 3400, Fax: +44 1932 26 3426
E-mail: [email protected]
Customer Service – Cochlear Asia Pacific
1 University Avenue, Macquarie University,
NSW 2109, Australia
Toll free (Australia) 1800 620 929
Toll free (New Zealand) 0800 444 819
Tel: +61 2 9428 6555, Fax: +61 2 9428 6352
or Toll free Fax 1800 005 215
E-mail: [email protected]
ACMA symbol (Australian
Communications and Media
Authority) compliant
Temperature limitation
Interference risk
Date of manufacture
Serial Number
By prescription
Bluetooth
®
Waste of Electrical and
Electronic Equipment
Radio compliance
certification for Korea
Radio compliance certification
for Brasil
Using your sound processor
The button on your sound processor lets you
choose from your pre-set programs and enable/
disable wireless streaming. You can choose to
enable the audio indicators to alert you of changes
to the settings and processor status.
Your sound processor is programmed to be used as
either a left or right-sided device. Your hearing care
professional will have marked your processor(s)
with a L or R indicator.
If you are a bilateral user, changes you make to
one device will automatically apply to the second
device.
On/off
See figure 2
1 Turn on your sound processor by completely
closing the battery compartment.
Turn off your sound processor by gently
2
opening the battery compartment until you
feel the first "click".
When your sound processor is turned off and then
back on again, it will return to the default setting
(program one).
Status indicator
3
See figure
Your sound processor is equipped with audible
indicators. For a an overview of the audible
indicators, refer to the table at the back of this
section.
Your hearing care professional can disable the
audio indicators if you prefer.
Change program/streaming
See figure 4
Together with your hearing care professional you
will have selected up to four pre-set programs for
your sound processor:
Program 1:
Program 2:
Program 3:
Program 4:
English
These programs are suitable for different listening
environments. Ask your hearing care professional
to fill in your specific programs.
To switch programs, press and release the button
on your sound processor. If enabled, an audio
indicator will let you know which program you are
using:
Program 1: 1 beep
Program 2: 2 beeps
Program 3: 3 beeps
Program 4: 4 beeps
Adjust volume
Your hearing care professional has set the volume
level for your sound processor.
You can adjust the volume level with the
optional Cochlear Baha Remote Control, the
Cochlear Wireless Phone Clip or an iPhone,
iPad or iPod touch (see Made for iPhone
section).
Wireless accessories
You can use Cochlear Wireless accessories to
enhance your listening experience. Ask your
hearing care professional to learn more about your
options or visit www.cochlear.com.
To activate wireless audio streaming, press and
hold the sound processor button until you hear a
melody. See figure 4
To end wireless audio streaming, press and
release the button. The sound processor will return
to the previous program.
5