Beeps
Your hearing care professional can set up your processor so you can hear the following beeps. The beeps
are only audible to the recipient.
Beeps
10 beeps
10 x dual beeps
1-4 beeps
1 beep
1 long beep
4 beeps 2 times
Beeps
Ripple tone in upward melody
Ripple tone upward melody
2 × ripple tone downward melody
6 beeps followed by ripple tone upward melody
(about 20 seconds after pairing)
Ripple tone upward melody
10
General
What it means
Start up.
Start up in Flight Mode.
Change program. Number of beeps
indicates the number of the current
program.
Volume level increased/decreased
by one step.
Volume limit reached.
Low battery warning.
Wireless
What it means
Wireless Accessory pairing
confirmation.
Wireless streaming activated.
End wireless streaming due to low
battery voltage and return to program.
MFi pairing confirmation.
Change from one wireless accessory
to another
Warnings
General advice
A sound processor will not restore normal
hearing and will not prevent or improve a hearing
impairment resulting from organic conditions.
• Infrequent use of a sound processor may not
enable a user to attain full benefit from it.
• The use of a sound processor is only part of
hearing rehabilitation and may need to be
supplemented by auditory and lip reading
training.
Serious incidents
Serious incidents are rare, any serious incident in
relation to your device should be reported to your
Cochlear representative and to the medical device
authority in your country, if available.
Warnings
• The sound processor is a digital, electrical,
medical instrument designed for specific use. As
such, due care and attention must be exercised
by the user at all times.
• The sound processor is not waterproof!
• Never wear it in heavy rain, in the bath or
shower!
• Do not expose the sound processor to extreme
temperatures. It is designed to operate
within the temperature ranges +5 °C (+41 °F)
to +40 °C (+104 °F). In particular, battery
performance deteriorates in temperatures
under +5 °C.
• The processor should not be subjected, at
any time, to temperatures below
+30 °C
-10 °C (+14 °F) or above
(+86 °F)
+55 °C (+131 °F).
• The sound processor should
be stored at temperature
ranges +15 °C (+59 °F) to
+15 °C
+30 °C (+86 °F).
(+59 °F)
• Contains small parts that
may present a choking or suffocation hazard.
• Adult supervision is recommended when the
user is a child.
English
• This product is not suitable for use in flammable
and/or explosive environments.
• The sound processor and other external
accessories should never be brought into a
room with an MRI machine, as damage to the
sound processor or the MRI equipment could
occur.
• The sound processor must be removed before
entering a room where an MRI scanner is
located.
• If you are to undergo an MRI (Magnetic
Resonance Imaging) procedure, refer to the MRI
Reference Card included in the document pack.
• Portable and mobile RF (radio frequency)
communications equipment can affect the
performance of your sound processor.
• The sound processor is suitable for use in
• electromagnetic environments with
power frequency magnetic fields of typical
commercial or hospital levels.
• Interference may occur in the
vicinity of equipment with the
symbol to the right.
• Dispose of batteries and electronic items in
accordance with your local regulations.
• Discard your device as electronic waste
according to local regulations.
• When the wireless function is activated, the
sound processor uses low-powered digitally
coded transmissions in order to communicate
with other wireless devices. Although unlikely,
nearby electronic devices may be affected. In
that case, move the sound processor away from
the affected electronic device.
• When using wireless functionality and the
sound processor is affected by electromagnetic
interference, move away from the cause of this
interference.
• Be sure to deactivate wireless functionality
when boarding flights.
• Turn off your wireless functionality by using
the flight mode in areas where radio frequency
emission is prohibited.
11