Zanussi ZWI 71000 WA Manual De Instrucciones página 13

Select the spin speed or Rinse Hold
option by pressing button 2
The relevant light will light up.
When selecting a programme, the light corre-
sponding to the maximum speed allowed for
that programme will illuminate.
Select the available options by pressing
buttons 3 and 4
Depending on the programme, different func-
tions can be combined. These must be selec-
ted after choosing the desired programme and
before starting the programme.
When these buttons are pressed, the corre-
sponding pilot lights illuminate. When they are
pressed again, the pilot lights go out. If an in-
correct option is selected, the integrated red
pilot light of the button 5 flashes for 3 times.
For the compatibility among the washing
programmes and the options see chapter
«Washing Programmes».
Select the Delay Start by pressing button
6
Before you start the programme, if you wish to
delay the start, press the button 6 repeatedly,
to select the desired delay. The relevant light il-
luminates.
You must select this option after you have set
the programme and before you start the pro-
gramme.
You can cancel or modify the delay time at any
moment, before you press button 5.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the but-
ton 6.
3. Press button 5:
– the machine starts its hourly countdown.
– The programme will start after the selec-
ted delay has expired.
Cancelling the delayed start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button 5.
2. Press button 6 once, the light relevant to
the selected delay goes off
www.zanussi.com
3. Press button 5 again to start the pro-
gramme.
The Delay Start can not be selected with
DRAIN programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time. If you need to open the door, you must set
the machine to PAUSE (by pressing the button
5) and then wait a few minutes. After you have
closed the door, press the button 5 again.
Start the programme by pressing button 5
To start the selected programme, press the
button 5, the corresponding green pilot light
stops blinking. The pilot light corresponding to
the running phase illuminates. The appliance
starts operating and the door is locked.
To interrupt a programme which is running,
press the button 5: the corresponding green pi-
lot light starts blinking.
To restart the programme from the point at
which it was interrupted, press the button 5
again. If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, the red pilot
light of the button 5 blinks 3 times.
Interrupting a programme
Press the button 5 to interrupt a programme
which is running, the corresponding green pilot
light starts blinking.
Press the button again to restart the pro-
gramme.
Cancelling a programme
Turn the selector dial to
gramme which is running. Now you can select a
new programme.
Opening the door
After the programme has started the door is
locked. If, for any reason, you need to open it,
set firstly the machine to PAUSE by pressing
the button 5. After a few minutes it will be pos-
sible to open the door.
If the door remains locked, this means that the
machine is already heating or that the water lev-
to cancel a pro-
13