Chicco 06620 Manual De Instrucciones página 29

when it is off.
ion: Switching on/off the baby unit in Music mode
y to Playing Lullabies
ght The baby unit can play 5 lullabies to reassure your
any child while he sleeps.
Press the lullaby on/off/selection button (3) for
about 3 seconds. The baby unit will begin to play
xed music in a sequence of 5 stored lullabies.
If the baby unit is already in music mode and
connected to an MP3 player (not included),
the simply remove the supplied audio cable (16)
sity from the baby unit audio input (11) to activate
the lullabies.
the
able ATTENTION: it is only possible to activate
lullabies if the baby unit is not in Baby Monitor
mum mode.
To select a lullaby, press the lullaby on/off/
will selection button (4) until you find the one you
wish to play.
To adjust lullaby volume, see Paragraph '+ -
sity Volume adjustment of the baby unit loudspeaker'.
Attention:
sity if while playing lullabies, the supplied audio
mum cable jack (16) is inserted in the audio input (11)
of the baby unit, the lullabies will be deactivated
and music from the MP3 player (not included),
ght switched on and connected to the other end of
ton the audio cable (16), will play
urn To switch off the lullaby feature, press the lullaby
on/off/selection button (4) again for about 3
sed seconds.
Each time lullabies are switched off and on again,
ain, the play sequence will start with the lullaby after
the last one heard.
ton
itch Playing from a music player that is not included
d in It is possible to play music stored on an external
music player, not included, by means of the baby
arily unit loudspeaker (10).
line ATTENTION: music can be played only if the baby
sity unit is not in Baby Monitor mode.
y 5 Switch on the music player and adjust volume.
ness Connect the two supplied audio cable jacks to the
audio output of the music player and to the audio
ode) input (11) on the baby unit.
the Position the baby unit and music player on a flat,
the stable surface, away from the reach of children.
Press the lullaby on/off/selection button (4) for
aby about 3 seconds. The baby unit will automatically
e or play music stored in the external music player.
If the baby unit is already in music mode and is
playing lullabies, to activate the MP3 player (not
included), simply connect the supplied audio
cable (16), already connected to the player, to the
baby unit audio input (11).
Attention:
To select songs to listen to or adjust the volume,
use the music player functions themselves. It is
not possible to select songs or adjust playback
volume using the buttons on the baby unit.
Attention:
Be sure to adjust the volume of the external music
player to a moderate level before connection to
the baby unit.
Attention:
If the music player is off, no sound will be heard
from the baby unit loudspeaker.
Attention:
Artsana S.p.A disclaims any responsibility for any
breakage and malfunction of the music player.
Attention:
if, during playback of MP3 player (not supplied),
the supplied audio cable jack (16) is removed from
audio input (11) on the baby unit, player music
will be deactivated and the lullabies stored in the
baby unit will be automatically played.
To switch off music play, press the lullaby on/off/
selection button (4) again for about 3 seconds.
Temperature sensor
A temperature sensor (9) that detects the child's
room temperature is located on the back of the
baby unit. The temperature is shown on the
display (5) of the parent unit in Baby Monitor
mode. For details, see paragraph 'Display of
Temperature detected by the baby unit sensor'.
To ensure that the data is detected reliably, make
sure that the sensor (9) on the back of the unit is
positioned in a free area and not in contact with
any other objects or surfaces.
Important: the temperature sensor (9) on the
baby unit should be used only as indicative tool
for detecting the temperature in the child's
room and is not intended to be used as a medical
instrument.
29