Chicco 06620 Manual De Instrucciones página 27

nds
light will begin to flash red.
itor
When charging of the rechargeable lithium-ion
battery begins, the beep switches off and the
rechargeable battery status indicator light lights
up steady red until charging is complete.
c) Reminder signal function.
with
12. Power and link indicator light:
(a) Steady green: linked with baby unit
e or
(b)Flashing green: absence of or loss of link with
baby unit
(c) OFF: parent unit off in Baby Monitor mode or
on in Reminder mode.
tion
13. Rechargeable lithium-ion battery status
indicator light:
el
(a)Flashing red: rechargeable battery almost flat
(b) Steady red: charging of rechargeable batteries
in progress via mains adapter
(c) OFF: rechargeable battery charged or
operation via mains adapter without rechargeable
battery
mAh
14. Rechargeable battery compartment closing
0Hz
panel
15. Belt hook
16. Holes for support cord (not included)
by
17. Audio output
18. 3.7V 800mAh
tion
battery via 100-240V ~ 50/60Hz /6V
500mA mains switching adapter
19. Power connector and/or rechargeable
ment
lithium-ion battery charger
20. Headphones
tion
1.4 Icons shown on the display
In Baby Monitor mode
tion
itor
ons
In Reminder mode
and
nds
s to
per
it is
wer
en.
Proper connection between units (only in
most
Baby Monitor mode)
the
Loss or lack of connection between units
ator
(only in Baby Monitor mode)
rechargeable lithium-ion
Date and time
21°C Temperature detected in child's room
(only in Baby Monitor mode)
--°C Temperature not detected
Voice activation function (only in Baby Mo-
nitor mode)
Vibration alarm set (only in Baby Monitor
mode)
Meal Reminder set
Measure fever reminder set
Medicine reminder set
Diaper change reminder set
Sleep reminder set
Minimum volume level (only in
Baby Monitor mode)
Maximum volume level (only in
Baby Monitor mode)
Rechargeable battery charged
Medium charging level on rechargeable battery
Low charging level on rechargeable battery
Rechargeable battery flat: the parent unit
will switch off within a few minutes
2. Description of features
2.1 Baby unit (primarily in transmitter mode):
2.1.1 Power:
Power via 100-240V~ 50/60Hz /6V
500mA (1) mains switching adapter or via two
1.5V AAA /LR03 Alkaline batteries (not included)
When power is supplied with mains adapter (1):
- insert the mains adapter jack (1) in the power
connector (15) on the side of the unit
- verify that the voltage corresponds to the rating
plate of the previously indicated adapters.
- insert the mains adapter plug in an easily
accessible power socket.
ATTENTION:
27