Technical Data - Felisatti JSF65/550E Instrucciones De Servicio

CHARACTERISTICS
Cutting capacity: (mm)
Wood
Light alloy
Steel
Inclined cuts up to
Voltage and current
Frequency (Hz)
Absorbed power, W
Strokes per minute
Weight (Kg)
The instructions contained in this manual must be strictly
followed, it should be carefully read and kept close at hand to
use when carrying out maintenance on the indicated parts.
If the tool is used with care and normal maintenance is carried
out, it will work well for a long time.
The functions and use of the tool you have bought shall be
only those described in this manual. Any other use of the tool
is strictly forbidden.
ILLUSTRATIONS
IDENTIFICATION (See figures)
A. Logotype plate
B. Data plate
C. Principal handgrip
D. Switch
E. Supplementary handgrip
F. Adjustable angle base H. R.p.m. regulator
I. Protective screen
L. Regulation side rod
M. Switch lock push button
N. Oscillating regulation
STANDARD EQUIPMENT
 saw blade package, Anti-chip screen, Anti-shavings device,
Suction unit pipe union, Hexagonal spanner, Regulation side
rod.
APPLICATIONS
The machine is supplied ready for use, the only operation
necessary is the insertion of the blade into the correct
position.
During cutting operations, make sure that the base is always
resting on the work piece.
In order to obtain top quality cutting and optimal performance,
both the amplitude hunt and advancement must be precisely
regulated, depending on the type of material that is being
used (for example: "0" amplitude hunt and slow advancement
should be adopted for sawing metal).
When cutting metals it is advised to spread a few drops of oil
on the cutting line.
Sheets should always be rested on sufficiently stable
supports (chip-board or plywood tables). In this manner
dragging is avoided and the elasticity of the material is
compensated for.
During use, make sure that the power supply cable does
not impede working operations or come into contact with the
tool.
Small work pieces should be securely clamped in order


TECHNICAL DATA

JSF65/550E JSF85/600E
65
1
6
°
5
0V/,A
50-60
550
00-800
,1
JSF100/700E
85
15
8
°
5
0V/,6A 0V/,0A
50-60
600
500-000 700-000
,5
that they remain in position during working operations (for
example: fix in position with a clamp).
SAFETY STANDARDS
The tool has been designed and constructed to permit
operation in all situations and in absolute safety. In particular
working conditions remember to use protective gloves and
safety goggles. The tool has been designed and constructed
to reduce noise to minimum levels. (See technical data).In
particular working conditions the maximum sound level at the
place of work may exceed
85dBA. In this case the operator must use ear protectors.
Work carefully and maintain the tool in perfect working order,
for your own safety.
The switch fitted on the saw prevents accidental machine
starting. However, a locking position has also been
provided.
PROTECTIVE SCREENS
Your saw is supplied with a transparent anti-chip screen and
with an anti-shavings device. Both of these devices must be
used during working operations.
The saw is supplied with a side guide in order to carry out
parallel cuts.
An oscillatory movement of blade can be obtained, permitting
safe and efficient work to be carried out on any type of
material.
Saw blades, Suction unit, Kit for Suction unit, Side guide.
GENERAL SAFETY STANDARD
See attached information: General safety standards.
This booklet forms an integrative part of this manual.
This tool is sold complete with accessories and the user's
manual, contained in a cardboard box (or in a metal case)
of suitable size and thickness for the work that the tool is
JSF120/750E
100
0
10
°
5 5
0V/,1A
50-60 50-60
705
500-000
,0
SWITCH
GUIDE
OSCILLATION
ACCESSORIES
PACKAGING
10
0
10
°
70
,6