Circuit Breaker Protection - Panasonic MJ-L501 Instrucciones De Funcionamiento

Troubleshooting (Continued)
Problem
Leakage of juice or
frozen dish.
The juicing bowl or
motor housing shakes
during operation.
The juicing bowl
sways during
operation.
Abnormal noise or
vibration.

Circuit breaker protection

The motor may stop running when the circuit breaker protection is activated to prevent overload of motor.
If the motor stops, please take the following steps:
1
Switch off the power.
Press the "O" (OFF) button.
● ■
2
Press the "R" (REVERSE) button to allow reverse
operation for several seconds.
3
Switch off the power and remove ingredients from
attachments.
4
Press the "I" (ON) button.
Reduce the amount of ingredients being fed in and push them gently into
● ■
feeding tube.
GB22
Cause and solution
Incorrect assembly of the gasket, rubber brushes and/or rubber
● ■
plug.
➡
Assemble them correctly. (See P. GB12, 13, 20)
This is normal.
● ■
Since the juicing bowl and motor housing are a split type, they
may shake when the squeezing screw is rotating.
Do not press the lid or juicing bowl. (Doing so may result in failure
of the juicer.)
The rubber plug is attached loosely.
● ■
➡
Attached the rubber plug correctly. (See P.GB20)
The squeezing screw, juice attachment or frozen cone are not attached correctly.
● ■
➡
Assemble them correctly. (See P. GB12, 13)
I
O
•
R