Troubleshooting Guide - BH FITNESS H856 Manual De Instrucciones

Program 10 is for 60% maximum heart rate
level.
Program 11 is for 75% maximum heart rate
level.
Program 12 is for 85% maximum heart rate
level.
To use these
START/STOP key to switch the monitor on, the
words PROGRAM 1 will appear on the screen.
Use the UP/DOWN keys to select the program
graph from 10 to 12, press ENTER and the
TIME window fl ash, you can now specify the
duration. Press ENTER to program in the
distance. Press ENTER to program in the
calories. Press ENTER to program your age.
Press START/STOP and begin the exercise.
Your hands must be placed on the pulse
sensors (R) when using these programs.
The lower window on the display (TARGET
H.R) will show you the calculated value for your
maximum heart rate level.
USER PROGRAMS
Programs 13 to 16 are user defi ned programs.
To use these
START/STOP key to switch the monitor
words PROGRAM 1 will appear on the screen.
Use tthe UP/DOWN keys to select the program
graph from 13 -16, press ENTER and the TIME
window fl ash, you can now specify
Press ENTER to program in the distance. Press
ENTER to program in the calories. Press
ENTER to program your age. Press ENTER and
the fi rst line of the profi le will fl ash, use the UP
/ DOWN keys to specify the exertion level you
require, press ENTER and the second stage will
fl ash and so on until you have completed the
profi le for doing your exercise, press START /
STOP to begin exercising. If you have not
specifi ed a time limit in the TIME programming
then the default duration for the whole profi le
will be 30 minutes, i.e. 3 minutes per stage.
HAND-GRIP (PULSE) INSTRUCTIONS/USE
On this model the pulse rate is measured by
placing both hands on the sensors (R), located
on the handlebar, as shown in Figure 4.
When both hands are placed on the sensors
the heart symbol on the right-hand side of the
screen, marked PULSE, will begin to fl ash and
after a few seconds a heart rate reading will be
displayed.
If both hands are not placed correctly then the
pulse function will not work. If a "P" appears on
the screen or the heart symbol does not fl ash
then make sure that both hands are placed on
the sensors and that the connectors (25) and
programs: Press
programs:- Press
on, the
the duration.
(35) are connected at the back of the electronic
unit.
TEST MEASUREMENTS: FITNESS
This electronic device is equipped with a
recovery test function. This offers you the
advantage of being able to measure how long it
the
takes your heart rate to recover after having
finished the exercise. After finishing the exercise
press the "Test" button, put your hands on the
pulse sensors (R) and a one minute countdown
will start. Only the Time and Pulse rate functions
read-outs will remain displayed. The electronic
device will measure your pulse rate during this
minute. The heart rate recovery time will be
displayed on the Heart rate line.
If, at any time during this minute, you decide to
abandon this test then press the "Test" button
and this will take you back to the main screen.
When the minute is up, the electronic device will
work out the difference and your fitness rating
will be displayed up on the screen: "F1.0,
F2.0,..., F5.0, F6.0; where F1.0 is the best
(fitness "Excellent") and F6.0 the worst (fitness
the
"Very Poor").
Pressing the TEST button again will take you
back to the main screen.
The comparison between the worked heart rate
and the recovery heart rate provides a fast,
simple method of gauging how fit you are. Your
fitness rating is a guideline that shows you how
fast your heart recovers after physical exertion.
If you exercise regularly then you will see your
fitness rating improve.
The test will not work if the sensor is not
positioned correctly.
The TEST will not work if you do not have both
hands placed on the hand-grip sensors (R) after
you have stopped doing the exercise.

TROUBLESHOOTING GUIDE

Problem: The display comes on but only the
Time function works
Solution:
a.- Make sure that the connection cable is
connected.
Problem: The display does not come on or the
displayed segments are very weak
Solution:
a.- Check that the batteries are fitted correctly.
b.- Check the battery charge
c.- If they are run down change them
immediately
Problem: Display segments of a function read-
9