Specifying monaural/
stereo and local
modes
Tips
• Each time you press
and hold DSPL/PTY
for two seconds, the
function menu
switches as follows:
$
AF/TA/TIR
$
BTM/MONO/LCL
$
DVOL/EL
• If the Select mode in
the Func. menu is set
to "Source," the
function menu
automatically
appears on the right
side of the display,
depending on the
source you select.
(see page 66)
To cancel the
monaural mode
Select "off" in step 2
above.
To cancel the local
mode
Select "off" in step 2
above.
Specifying monaural/stereo mode
If the FM stereo reception is poor, you can select "on" to
improve the sound.
1
While listening to an FM broadcast, press and
hold DSPL/PTY for two seconds to display
BTM/MONO/LCL.
2
Press MONO to select "on."
The sound will improve, but will not be in stereo.
Selecting the mode with the wireless remote
While listening to FM, press MENU and set the Mono/
Stereo mode to "mono," or "stereo."
Receiving only the strongest signals
(Local on/off)
The Automatic Tuning function may stop frequently when
there are many radio stations in the area. If this happens,
you can reduce the sensitivity of the tuner so that only the
strongest signals are tuned in.
1
While listening to an FM, MW or LW
broadcast, press and hold DSPL/PTY for two
seconds to display BTM/MONO/LCL.
2
Press LCL to select "on."
Only the stations with relatively strong signals will be
tuned in.
Selecting the mode with the wireless remote
While listening to FM, MW or LW, press MENU and set
the Local mode to "on," or "off."
DSPL/PTY
PTY
DSPL
OPEN
B T M
M O N O
L C L
5
6
7
8
9
10
MONO
LCL
GB
41
Radio