Sony CDX-C90R Manual De Instrucciones página 38

Tip
If the SEEK/AMS
mode is set to "Item
sel," you can select the
desired station with
SEEK/AMS when the
list appears in the
display (see page 63).
Note
If you assign a new
frequency to a preset
station number that has
already been assigned a
frequency, the new
frequency replaces the
old frequency.
GB
Note
When you assign
stations to the preset
numbers 11 to 20, use
manual preset (see
page 37.)
38
Radio
6
Press /, then > or . to select "manual," then
ENTER.
7
Press > or . to select the preset station
number to which the frequency will be stored
then press ENTER.
You can preset up to 20 FM stations and 10 for each
MW and LW.
M a n u a l P r e s e t
F M 1 0 4 . 1 0 M H z
O v e r W r i t e ?
I n s e r t ?
D e l e t e ?
8
Do the following to store the frequency.
To replace the contents of the preset station number
with the current frequency, select "Over Write ?" by
pressing > or ., then press ENTER.
To add the current frequency to the Manual Preset list,
select "Insert ?" by pressing > or ., then press
ENTER.
9
Press BACK.
The normal display appears.
To delete the frequency stored to the selected number
Select "Delete ?," then press ENTER in step 8.
To receive a station automatically (Automatic Tuning)
Press and release ? or /.
"Seek Up" or "Seek Down" appears until the unit
detects a station.
For a lower frequency
Tip
You can start Automatic Tuning by momentarily rotating
SEEK/AMS on the rotary remote, then releasing it.
Presetting the station with the front panel controls
After tuning in the station, press and hold the desired number
button (1 to 10) for two seconds.
1 . 1 0 6 . 3 0
2 . 1 0 1 . 9 0
3 .
9 6 . 0 0
4 . 1 0 2 . 5 0
5 . 1 0 5 . 4 0
For a higher frequency