Re-tuning the same programme
automatically
The Alternative Frequencies (AF) function
automatically selects and re-tunes the station with
the strongest signal in a network. By using the
function, you can listen to the same programme
continuously during a long-distance drive without
having to re-tune the station manually.
Tip
Each time you press
and hold DSPL/PTY
for two seconds, the
function menu switches
as follows:
$
AF/TA/TIR
$
BTM/MONO/LCL
$
DVOL/EL
(Alternative Frequencies (AF))
While listening to an FM broadcast, press AF to
select "on."
Tip
If the Select mode in the Func. menu is set to "Source," the
function menu automatically appears on the right side of the
display, depending on the source you select. (see page 66)
To cancel the AF function
Select "off" above.
Notes
• When there is no alternative station in the area and you do not
need to search for an alternative station, turn the AF function
off.
• "NO AF" appears when the unit cannot find an alternative
station in the network.
• If the station name is reversed, after tuning to a station with the
AF function on, this means that no alternative station is
available. If this happens, push SEEK/AMS up or down while
the station name is reversed. The unit starts searching for
another frequency with the same PI (Programme Identification)
data. "PI seek" appears in the display and no sound is heard at
this time. If the unit cannot find another frequency, "NO PI"
appears and the unit returns to the originally selected
frequency.
Selecting the mode with the wireless remote
While listening to FM, press MENU and set the AF mode
in RDS to "on," or "off."
PTY DSPL
OPEN
5
6
7
8
9
10
AF
GB
35
Radio