Setting the Dynamic
Soundstage Organizer
— DSO
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers above the dashboard (virtual
speakers).
You can store the DSO setting for each source.
DSO mode and image of virtual speakers
*3
*2
*1
*4
*1 DSO 1
*2 DSO 2
*3 DSO 3
*4 DSO OFF
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press (MENU).
3
Press < or , repeatedly to select
"Sound," then press (ENTER).
4
Press < or , repeatedly to select
"DSO," then press (ENTER).
5
Press < or , repeatedly to select the
desired mode, then press (ENTER).
To cancel the DSO mode, select "OFF."
6
Press (MENU).
The display returns to the normal display.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable effect.
• If FM broadcasts are difficult to hear, set "DSO" in
"Sound" to "OFF."
Tip
The sound effect of the DSO mode increases as the
number increases.
30
*3
*2
*1
*4
Setting the equalizer
— EQ7
You can select an equalizer curve for 7 music
types (Xplod, Vocal, Club, Jazz, NewAge, Rock,
and Custom).
You can adjust a different equalizer setting for
each source.
Selecting the equalizer curve
1
Press (SOURCE) to select a source
(radio, CD, MD or AUX).
2
Press (MENU).
3
Press < or , repeatedly to select
"Sound," then press (ENTER).
4
Press < or , repeatedly to select
"EQ7," then press (ENTER).
When changing the equalizer curve, select
"Select," then press (ENTER).
5
Press < or , repeatedly to select the
desired equalizer curve, then press
(ENTER).
6
Press (MENU).
The display returns to the normal display.
To cancel the equalizer curve, select "OFF," in
step 5.
Note
While DSO is activated, equalizer settings are
automatically adjusted for best overall effect.