Bosch PS22 Instrucciones De Funcionamiento Y Seguridad página 4

2610051963.qxp_PS22 PS32 1/15/19 8:50 AM Page 4
away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects that can
make a connection from one terminal to
another. Shorting the battery terminals
together may cause burns or a fire.
Under abusive conditions, liquid may be
ejected from the battery, avoid contact.
If contact accidentally occurs, flush with
water. If liquid additionally seek medical help. Liquid
ejected from the battery may cause
irritation or burns.
Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable
behaviour resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 265 °F may
cause explosion.
Safety Rules for Cordless Screwdrivers
Hold the power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring. Fasteners contacting a "live" wire
may make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
Safety Rules for Cordless Drill/Drivers
▶ Safety instructions for all
operations
Hold the power tool by insulated
gripping surfaces, when performing an
operation where the cutting accessory
or fasteners may contact hidden wiring.
Cutting accessory or fasteners contacting
a live" wire may make exposed metal
parts of the power tool live" and could
give the operator an electric shock.
▶ Safety instructions when
using long drill bits
Never operate at higher speed than the
maximum speed rating of the drill bit. At
General Power Tool Safety Warnings
contacts eyes,
Follow all charging instructions and do
not charge the battery pack or tool
outside the temperature range specified
in the instructions. Charging improperly
or at temperatures outside the specified
range may damage the battery and
increase the risk of fire.
▶ Service
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or
authorized service providers.
higher speeds, the bit is likely to bend if
allowed to rotate freely without
contacting the workpiece, resulting in
personal injury.
Always start drilling at low speed and
with the bit tip in contact with the
workpiece. At higher speeds, the bit is
likely to bend if allowed to rotate freely
without contacting the workpiece,
resulting in personal injury.
Apply pressure only in direct line with
the bit and do not apply excessive
pressure. Bits can bend causing breakage
or loss of control, resulting in personal
injury.
-4-