Matrix PERFORMANCE Manual Del Usuario página 11

MAINTENANCE
1) Any and all part removal or replacement must be performed by a qualified service technician.
2) DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country's local MATRIX dealer.
3) MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for
any reason. They contain important information. If unreadable or
missing, contact your MATRIX dealer for a replacement.
4) MAINTAIN ALL EQUIPMENT: The safety level of the equipment can be maintained only
if the equipment is examined regularly for damage or wear. Preventative maintenance
is the key to the smooth operation of equipment as well as keeping liability to a
minimum. Equipment needs to be inspected at regular intervals. If signs of damage
or wear are found, remove equipment from service. Have a service technician inspect
and repair the equipment prior to putting the equipment back into service.
5) Ensure that any person(s) making adjustments or performing maintenance or
repair of any kind is qualified to do so. MATRIX dealers will provide service
and maintenance training at our corporate facility upon request.
WARNING!
To remove power from the unit, the power cord must be disconnected from the wall outlet.
RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your equipment.
• Use a soft, clean cotton cloth. DO NOT use paper towels to clean surfaces on
the treadmill. Paper towels are abrasive and can damage surfaces.
• Use water and a mild soap or other MATRIX approved solution
(cleaning agents should be alcohol and ammonia free).
• Do not pour water or cleaning solutions on any surface. This could cause electrocution.
• Wipe the console, heart rate grip, handles and side rails after each use.
• Performance only: Brush away any wax deposits from the deck and belt area.
This is a common occurrence until the wax is worked into the belt material.
• Be sure to remove any obstructions from the path of the
elevation wheels including power cords.
• For cleaning touch screen displays, use distilled water in an atomizer spray
bottle. Spray distilled water onto soft, clean, dry cloth and wipe display until
clean and dry. For very dirty displays, adding vinegar is recommended.
CAUTION!
Be sure to have proper assistance to install and move the unit in
order to avoid injury or damage to the treadmill.
MAINTENANCE SCHEDULE
ACTION
Unplug the unit. Clean entire machine using water and a mild
soap or other MATRIX approved solution (cleaning agents
should be alcohol and ammonia free).
Inspect the power cord. If the power cord is damaged, contact
Customer Tech Support.
Make sure the power cord is not underneath the unit or in any
other area where it can become pinched or cut during storage
or use.
Unplug the treadmill and remove the motor cover. Check for
debris and clean with a dry cloth or small vacuum nozzle.
WARNING: Do not plug the treadmill in until the motor cover
has been reinstalled.
DECK AND BELT REPLACEMENT (PERFORMANCE ONLY)
One of the most common wear and tear items on a treadmill is the deck and
belt combination. If these two items are not properly maintained they can
cause damage to other components. This product has been provided with
the most advanced maintenance-free lubrication system on the market.
WARNING: Do not run the treadmill while cleaning the belt and deck.
This can cause serious injury and can damage the machine.
Maintain the belt and deck by wiping the sides of the belt and deck
with a clean cloth. The user can also wipe under the belt 2 inches
(~51mm) on both sides removing any dust or debris.
The deck can be flipped and reinstalled or replaced by an authorized
service technician. Please contact MATRIX for more information.
FREQUENCY
DAILY
DAILY
DAILY
MONTHLY
11