Removing The Built-In Rechargeable Battery - Panasonic ER-CA70 Instrucciones De Operación

Cleaning the blade
►
If washing in water
Warning ‑ Detach the hand held part from the power cord before
cleaning it in water.
1. Rinse off any hairs
sticking to the blade and
any hairs inside the
clipper.
►
If cleaning with brush
1. Brush off 2. Remove the
any hairs blade and
from the brush off
clipper and the hairs
from around from the
the blade. blade edge.
6
2. Shake the clipper 4 or 5
times gently, wipe off any
water drops from the
clipper and blade, and
then let it dry onto a towel
with the "Washable"
indicator facing upward.
3. Brush the hairs out
from between the fixed
blade and the moving
blade while pressing
down on the lever for
cleaning to raise the
moving blade.
►
After cleaning the blade with water or brush
1. Apply a few drops of the oil to the points
indicated by the arrows.
2. Remount the blade on the clipper.
• Apply the oil to the clipper after use. Otherwise
the blades may become dull, make abnormal
noises, or becomes hot and lead to the
deterioration of cutting performance.
Removing the built-in rechargeable battery
Remove the battery as illustrated.
1. Disconnect the clipper from the AC adaptor when removing the
battery.
. Fully discharge the battery.
3. Be careful not to short the + and ‑ terminals of the battery after
removing it.