Time Settings - Strong SRT 6015 Manual Del Usuario

UM 6005-15 ENG 1/26/06 4:18 PM Page 33
PART 1 English

5.3.1.3 Time Settings

If a broadcaster provides GMT, you can set the time using GMT, or set your own time by yourself. If the
GMT usage is ON then the Current time is set automatically or you can set the time zone. If your
broadcaster provides the correct time offset then your receiver will change from summertime to winter-
time automatically.
If you set GMT Usage to OFF, Set Data and Set Time item are displayed.
To set the time value manually, move the cursor to the time item and use the numeric buttons on the
remote control.
SCREEN 37
5.3.1.4 Set Factory Default
Please be careful when using this function, because it will erase all the data and parameters you may
have set earlier to your receiver. Once you set the factory default you will have to re-install your preferences
and re-scan your channels. To reset your receiver to factory default, apply the following steps:
Select Set Factory default and press OK. The warning message will appear as below.
33