Connecting To Satellite Dish - Strong SRT 6015 Manual Del Usuario

UM 6005-15 ENG 1/26/06

3.3 Connecting to Satellite Dish

<Connecting a fixed satellite dish to your receiver>
First choose which satellite you want to receive your signals from, and have your dealer aim
your dish at the requested satellite.
Connect a coax cable to your LNB and the other end directly to the SAT IN connector of your
receiver.
<Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch>
If you want to watch programs from more than one satellite (For example from Astra and from Hot
Bird) it is advisable to use fixed dishes and a DiSEqC 1.0 switch. Have your Dealer aim the dishes at
the requested satellites and connect the LNB's with coax cables to the IN connectors of the DiSEqC 1.0
switch . Connect the OUT connector of the DiSEqC 1.0 switch to the SAT IN connector at the back of
your receiver.
FIGURE 8. Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch
12
4:18 PM Page 12
FIGURE 7. Connecting a fixed satellite dish to your receiver
PART 1 English