Idiomas disponibles
Idiomas disponibles
Read and understand all instructions. Failure to follow all instruc-
tions listed below, may result in electric shock, fire and/or serious
personal injury.
IMPORTANT SAFETY AND OPERATING INSTRUCTIONS
Read and follow all instructions in the
rotary hammer Operating/Safety Instruc-
tions in addition to the instructions in
this manual. Both documents contain in-
formation that covers the safety and prop-
er operation of the tool.
Ensure that the right angle attachment is
properly installed before operating. The
user could experience a loss of control if
improperly installed.
Do not grasp the right angle attachment
during or immediately after use bare-
handed. Wear protective gloves if nec-
essary. The surface of the right angle at-
tachment may get hot during prolonged
use and burn the user.
During operation, ensure that you main-
tain a body position that assures that you
can maintain control of the tool. The right
BM 160992A0H3.indd 2
"SAVE THESE INSTRUCTIONS"
Safety Rules
angle attachment is designed to allow the
user to get into tight spaces. However, it
is important that the user not operate the
tool in a way where he cannot maintain full
control and balance.
Disconnect the tool's plug from the pow-
er source before making any assembly,
adjustments or changing accessories.
Such preventative measures reduce the
risk of starting the tool accidentally.
Use care when making bit changes. Al-
low the bit to cool if needed before re-
moving from the tool or wear protective
gloves. The bit may become hot during
use and potentially burn the user when
handling.
2
10/31/13 2:02 PM
