General Information - WIKA GDT-20 Manual De Instrucciones

1. General information

1. General information
The transmitter described in the operating instructions has been designed and
■
manufactured using state-of-the-art technology. All components are subject to strin-
EN
gent quality and environmental criteria during production. Our management systems
are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regula-
■
tions for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
■
product contrary to its intended use, non-compliance with these operating instruc-
tions, assignment of insufficiently qualified skilled personnel or unauthorised modifi-
cations to the instrument.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheets:
- Application consultant:
28
www.wika.de / www.wika.com
SP 60.09 (model GDT-20),
SP 60.14 (model GDHT-20)
Tel.: +49 9372 132-8971
Fax: +49 9372 132-8008971
[email protected]
WIKA operating instructions transmitter, models GDT-20 and GDHT-20