GYS NOMAD POWER 10 Manual Del Usuario página 8

Disposal:
• This product should be disposed of at an appropriate recycling
facility. Do not dispose of in domestic waste.
•The battery must be removed from the device before the latter is
discarded.
•The device must absolutely be disconnected from the power supply
network before removing the battery.
OPERATION
Indicators
Lights
Internal battery
capacity for the
device
Indicators flash in turn, whilst charging the device. The number of indicators ON indicates the capacity of the NOMAD
POWER internal battery. All lights are steady if the battery is on hold or the charge is complete.
!
RECHARGE THE NOMAD POWER before first use and after each use.
INTERNAL BATTERY CHARGING
OR
OR
not supplied
STARTING THE VEHICLE
Emergency start function for petrol or diesel vehicles with a 12V battery.
To start a vehicle, please process as follows:
!
If the NOMAD POWER voltage is inferior to the vehicle voltage, the NOMAD POWER will not operate.
8
NOMAD POWER 10
Press the ON/OFF button
1 flashing 1 steady
0% 25%
1 - Connect mains adaptor to domestic mains.
2 - Connect the other end to the NOMAD POWER
1 - Connect car adaptor to the car cigarette lighter socket.
2 - Connect the other end to the NOMAD POWER
1 - Plug the USB cable to a charger with a USB output (not supplied)
2 - Plug the other end to the NOMAD POWER
to check internal battery level of the NOMAD POWER.
2 steady
50%
3 steady 4 steady
75%
to start the charge.
to start the charge.
to start the charge.
EN
100%