Sanus Systems VMCC1 Instrucciones De Montaje Internacional página 3

Thank you for choosing the Sanus Systems VMCC1. The VMCC1 is designed to mount a center channel speaker below a Sanus VMSA,
VMAA, VMAA18, VMAA26, VMDD or a VMDD26 Flat Panel Wall Mount.
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a quali-
fied contractor or contact Sanus at 800.359.5520 or www.sanus.com. Check carefully to make sure that there are no missing or defective
parts. Our customer service representatives can quickly assist you with installation questions and missing or damaged parts. Replace-
ment parts for products purchased through authorized dealers will be shipped directly to you. Never use defective parts. Improper instal-
lation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified by Sanus Systems.
Sanus Systems can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use. Please call
Sanus Systems before returning products to the point of purchase.
Required Tools: Phillips screw driver and crescent wrench.
Supplied Parts and Hardware: Hardware shown as actual size.
(1) Left Upper Extension - a
(2) Bar Bracket - e
(2) M4 x 10 Bolt - h
(2) Spacer - l
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
VMCC1ins_010606_ML.indd 3
Assembly Instructions for Model: VMCC1
(1) Right Upper Extension- b
(2) Speaker Bracket - f
(2) M5 x 10 Bolt - i
(8) 1/4 - 20 Nut - m
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11.16.05
(2) Lower Extension - c
(10) 1/4 - 20 x 3/8 Bolt - j (10) 1/4 - 20 x 5/8 Bolt - k
(2) Axis Bracket - d
(1) Support bar - g
(2) 1/4 - 20 x 1500 Bolt - n
1/16/06 10:31:51 AM