Sanus Systems VMCC1 Instrucciones De Montaje Internacional página 10

Step 13: Add center channel to VMCC1
Slide the Bar Brackets (e) until the Speaker Brackets (f) line up with the threaded inserts on the back of the speaker. Select the proper
bolt for your center channel speaker by hand threading the M4 x 10 Bolt (h), M5 x 10 Bolt (i) or 1/4 - 20 x 3/8 Bolt (j) into the into the
threaded inserts in the back of the speaker to determine which fits. Once you have selected the proper bolt, insert it through each of the
Speaker Brackets and thread it into the center channel. Tighten each Bolt with a Phillips screw driver. See Diagram 13 below.
You can now center the speaker with the TV by sliding it left or right. Once it is positioned, tighten the 1/4 - 20 x 5/8 Bolt (k), installed
in Step 6, until it bottoms out against the Support Bar.
To adjust the vertical placement of the speaker, loosen the 1/4 - 20 x 3/8 Bolts connecting the Upper and Lower Extension arms and
reposition the arms until center channel is at desired position.
See Step 5 for depth adjustment of speaker.
Diagram 13
speaker
f
j
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 11.16.05
Customer Service: 800.359.5520. See complementary Sanus products at www.sanus.com
VMCC1ins_010606_ML.indd 10 1/16/06 10:32:08 AM