3.3 AIM OF USE
The pump is exclusively devoted to:
– Be used with clean water and temperature from +4°C up to +60°C, for not alimentary
use.
– Be used with detergents in watery solution.
The pump cannot be used with:
– Watery solutions with higher level of stickiness and density in comparison of water.
– Solutions of chemical products that you are not sure can be compatible with the pump
materials.
– Seawater or high saline concentration.
– Any kind of fuels and lubricants.
– Inflammable liquids or liquefied gas.
– Fluids for alimentary use.
– Any kind of solvents and diluents.
– Any kind of varnish.
– Fluids with temperature lower than 4°C or higher than 60°C.
– Fluids containing grains or solid suspended particles.
The pump cannot be used to wash persons, animals, electric equipment, delicate ob-
jects, the pump itself or the system where the pump is installed.
The pump cannot be used in environments presenting particular conditions, as, for in-
stance, corrosive or explosive atmospheres.
Any different use must be considered improper.
The producer is not responsible for any damages deriving from improper or incorrect
use.
40