General Safety Rules; General Safety Regualtion - Bertolini C 300 Serie Manual De Usuario

The high energy of the pressure jet is a source of serious dangers.
Only skilled personnel must use the pump.
It is recommended to fit mechanically pre-fastened high-pressure pipes. They must be
homologated for the Max. admissible pressure in the system, and they must carry over
the stamping of the overpressure and the Max. admissible temperature, besides the
name of the manufacturer and the date of production.
Before starting, always check your system.
Particularly check the pipeline integrity, the high-pressure fittings and the gun trigger,
which should work in a soft way, without releases, and should immediately return to its
position, when released.
Do not use defective high-pressure pipe and do not try to repair it, rather replace it by an
original spare part.
Keep children and animals away when the system is working.
The system must be installed on a strong and safe base.
Always wear eye protection when operating.
Always hold the spray gun with both hands when using.
Do not turn the jet against people, animals and fragile objects.
Do not turn the jet against cables or electric equipment, on sockets and nearby.
Do not place yourself in front of the pressure jet.
To clean delicate surfaces exclusively use fan-shaped jets and keep nozzle at least 75
cm away.
If the system operates with gasoline engine, be sure the installation area is adequately
ventilated.
THE EXHALATION OF THE EXHAUST GAS COULD BE MORTAL!!!
All the moving parts, and in particular the drive function units, must be well protected
against accidental contacts.
Do not use the equipment to clean surfaces containing asbestos.
Strictly follow the current regulations related to the draining of substances taken down
from the surfaces where the pressure jet is used.
Idromeccanica Bertolini declines any civil or criminal liability for damage or accidents to
persons or property arising from the failure to observe even only one of the above men-
tioned safety regulations.

1- GENERAL SAFETY RULES

36