DeWalt DCR027 Traducido De Las Instrucciones Originales página 30

EngLIsh
Scan' and select this option by pressing the Enter/Display
button 7 .
2. Press the right arrow button to select the Yes option.
3. Press the Enter/Display button
'Auto Scan'.
Once 'Auto Scan' is complete the radio will play the first station
it finds.
Display
Press the Enter/Display Button
text, date and station information.
station Prune
Some stations once received by your radio which are no longer
available may display with a ? after the station name.
To remove these stations from the station list, use the
'Prune' function:
Press Menu 10 and scroll right to the 'Prune' option.
1. Press Enter/Display 7 to select.
Dynamic Range Compression (DRC)
This function reduces the difference between the loudest
and quietest audio being broadcast. Effectively, this makes
quiet sounds comparatively louder, and loud sounds
comparatively quieter.
The following options are available:
- broadcast 'DRC' will be ignored
• 0
• 1/2 - sets 'DRC' at half the level transmitted
• 1 - uses the 'DRC' level transmitted
• 2 - doubles the 'DRC' level transmitted
nOTE: DRC only works if it is enabled by the broadcaster.
To adjust:
1. Press Menu 10 and scroll right to the 'DRC' option.
2. Press Enter/Display to select.
7
3. Select the desired number displayed on the LCD
the arrow buttons 5 .
4. Press Enter/Display to confirm.
7
Tune or Seek Function (FM)
There are two tuning methods and one seek method for finding
the desired frequency.
To tune:
Press and release the right or left arrow button
the desired frequency is found.
To seek:
Press and hold the right or left arrow button
The tuner frequency will change to the first radio station with
acceptable clarity and stop at that station.
nOTE: When the charger/radio is paired to a Bluetooth® device
the right and left arrow buttons
previous tracks on the audio device.
To Program the Clock
In 'DAB' mode the time/date automatically synchronises
with national time signals. If the time/date does not update
automatically it can be updated manually.
28
to perform the
7
7 to alternate between scrolling
11 using
. Repeat until
5
for 2 seconds.
5
can be used to skip or go to
5
To adjust the Clock Manually:
1. Press the Menu button 10
2. Use the arrow buttons 5 to scroll to 'Clock Adjust' on the
LCD display and press the Enter/Display button
3. Scroll to ''Date & Time' and press the Enter/Display button
4. Set the date and time using left and right arrow buttons.
5. Once the desired time is set press the Enter/Display button
to commit.
Other Clock adjust menu options:
• Time format: Select a 12h or 24h time display format
• Date format: Select the date display format, MM/DD/YYYY,
YYYY/MM/DD or DD/MM/YYYY.
To Program the Preset/Memory Buttons
Ten 'DAB' and ten 'FM' radio stations may be independently set.
After programming the buttons, pressing 1-2, 3-4, 5-6, 7-8 or
9-10 will instantly change the frequency to the preset station.
1. Set the radio to desired station (see Tune or Seek Function).
2. Press and hold one of the desired memory buttons
the preset number begins flashing in the LCD display
Release the button and wait for the preset display to
stop flashing.
Each memory button can store two preset stations.
To store a second Preset:
1. Manually set the radio to desired station (see Tune or
Seek Function).
2. Press and hold one of the desired memory buttons until the
preset number begins flashing in the LCD display.
3. Press the preset button a second time so that the next
preset number displays.
4. Release the button and wait for the preset display to
stop flashing.
To Adjust the EQ
Bass and treble can be adjusted by changing the
Equalisation (EQ) settings of the radio.
1. Press the Menu button 10
'Sound EQ'.
2. Press the right arrow button to increase the bass or the left
arrow button to decrease it.
3. Once desired adjustment is achieved, press the
Enter/Display button 7 .
4. Repeat steps 2 and 3 for treble adjustment.
Playing Audio Through an External
Device (Fig. A)
Audio can be played through the charger/radio via a wireless
Bluetooth® connection to a compatible Bluetooth® device or by
connecting audio device or mobile phone using a 3.5 mm audio
cable to the audio port 15 located inside the device storage
compartment .
4
Pairing Charger/radio with a Bluetooth® audio Device
1. Place the charger/radio and the Bluetooth® audio source
within 1 m of each other.
2. Turn charger/radio on by pressing the power button
.
.
7
8 until
11
and use the arrow keys to select
1 .
7 .
.